ENGLISH - 18
B-3
B-1
C. Apply silicone between mounting plate and masking tape
Remove masking tape and allow to dry
C-4
C-2
Apply silicone around mounting plate edges
C-3
C-1
Tidy silicone surface
Repeat the same for the remaining mounting
plates
B. Assemble 2pcs of M4x20 bolt to fix the four(4) mounting plates each
B-4
B-2
Place main unit on the top of fixed plate. Put back
the mounting plate on the silicone applied and
make two(2) holes (2mm) with power drill
7
Apply silicone on the holes
Assemble mounting plate using two(2) M4x20
screws
Re-apply silicone to cover tightened screws
8
