Page 15
44
42
40
38
36
*36
*36
*36
*36
*36
54
51
48
45
42
39
36
*36
*36
*36
64
60
56
52
48
44
40
36
*36
*36
74
69
64
59
54
49
44
39
*36
*36
84
78
72
66
60
54
48
42
36
*36
94
87
80
73
66
59
52
45
38
*36
104
96
88
80
72
64
56
48
40
*36
114
105
96
87
78
69
60
51
42
*36
124
114
104
94
84
74
64
54
44
*36
134
123
112
101
90
79
68
57
46
*36
144
132
120
108
96
84
72
60
48
36
*36
*36
*36
*36
*36
*36
*36
*36
*36
*36
1/12
2/12
3/12
4/12
5/12
6/12
7/12
8/12
9/12
10/12
11/12
12/12
*UT-36
*UT-24
*UT-18
*UT-12
*UT-06
*T-ITP
*T-EL15KIT
*TEL30KIT
*T-CSB
*T-AWS
*T-CCSK
URSP
*T-LB
*T-AD
DESCRIPTION
DESCRIPTION
*T-IWT
*T-WB
URBK
*T-AP
*T-AIS
*T-JS
*T-FS
*T-RT
*T-FF
*T-FA
*T-FAA
*T-SC
Requirement # 1 :
The code requires that the chimney must extend at least 3 feet (900mm) above the highest point of the roof that
it penetrates.
Requirement # 2 :
It must also be 2 feet (609mm) above any roof, wall or other obstruction within a horizontal distance of 10 feet (3m).
The following Chart is to assist you in determining the minimum chimney height you will require above the roof. You may need
to add to this height as nearby buildings, trees and other parts of the house roof could interfere with airflow over and around
the top of the chimney and affect its performance. If you think a nearby obstacle could affect draft, you might want to install
one or more additional lengths.
CHART 2 - CHIMNEY HEIGHT ABOVE THE ROOF
DISTANCE
FROM PEAK
10 Ft
9 Ft
8 Ft
7 Ft
6 Ft
5 Ft
4 Ft
3 Ft
2 Ft
1 Ft
CHIMNEY HEIGHT ABOVE ROOF (INCHES)
PITCH OF ROOF
* Defaulted to 36" to meet requirement #1. Both requirements (#1 and #2) must be met.
• If the chimney extends more than 5 feet or more above the roof, a Universal Roof Brace Kit is required.
• All lengths above the roof must have locking bands at all joints. This will eliminate the risk of sections becoming undone below the roof line when
the Round Top is removed when inspections and cleaning of the system is being done.
All measurements are in inches with the exception of "distance from the peak" being in feet.
REPLACEMENT PARTS LIST
ULTRATEMP
PART NO.
ULTRATEMP
PART NO.
36" Chimney Length
24" Chimney Length
18" Chimney Length
12" Chimney Length
6" Chimney Length
Tee with Insulated Plug
15
o
Elbow Kit
30
o
Elbow Kit
Ceiling Support
Adjustable Wall Support
Cathedral Ceiling Support Kit
Roof Support
Locking Band
Stove Pipe Adapter
Insulated Wall Thimble
Wall Band
Universal Roof Brace Kit
Anchor Plate
Attic Insulation Shield
Firestop Joist Shield
Firestop Spacer
Type HT Round Top
Flat Roof Flashing
1/12 - 7/12 Roof Flashing
8/12 - 12/12 Roof Flashing
Storm Collar
* Specify chimney diameter (5, 6, 7 & 8 inches)
