DT-E 11.11.1 BALCONY AWNING ITALIA BALCONY
Edition: March 2017, Issue 2
English
page 16 / 19
3.7
Manual drive
Setting the awning tilt angle is performed:
by unlocking the arm blocade with a handwheel
with the use of a crank
by blocking the arms with a handwheel
After setting the tilt angle, proper fabric tension is provided by slightly rolling up the excess of fabric.
Gears 11:1 are not equipped with overturn protection (so called mechanical end stop).
Pay attention to the maximum awning tilt angle.
Do not allow the fabric to be rolled in the opposite direction (from the bottom of roller tube), since it
may cause its ripping off the roller tube, fabric damage or incorrect awning functioning.
