DT-E 11.11.1 BALCONY AWNING ITALIA BALCONY
Edition: March 2017, Issue 2
English
page 10 / 19
Awning installation, adjustment and test its testing can be carried out by service crew or trained
persons only. Person conducting the installation and first run is responsible for appropriate fixing of the
awning including fixing elements, allowing for its correct operation and parameters.
Improper installation may cause hazardous situation for the user.
3.5
Installation tools
hammer drill, drills
ladder/scaffolding
screw driver
hammer
measure tape
pencil/marker
spirit level
ring/flat wrenches, Allen keys
anchors
3.6
Italia Balcony awning installation
For base – uncracked concrete C20/25 class and no higher than C50/60:
Anchors M10x110 A4 embedded on injection mortar (recommended anchors from Fischer FIS A
M10x110 A4 on resin FIS V, embedment depth in concrete shall be 80 mm, or equivalent product from
different supplier)
Choice of arm mounting depends on the handrail
Minimum base thickness is 150 mm for M10 anchor.
The wall-ceiling brackets should be installed on the edges from both sides of the awning.
Wall-ceiling bracket (right side)
