DT-E 11.11.1 BALCONY AWNING ITALIA BALCONY
Edition: March 2017, Issue 2
English
page 18 / 19
5. Disassembly/ Utilization/ Disposal
Improper system disassembly can result in severe injuries and system damage.
System disassembly should be commissioned to a properly qualified assembly team or to a person
suitably trained within industrial safety and with the knowledge concerning recovery.
Disposal of worn electrical and electronic equipment
After the end of product lifetime it must be disassembled and separate material must be segregated according
to Regulation of the Minister of Environment of 9 December 2014 on waste catalogue – Dz. U. [Journal of
Laws] of 2014 item 1923
No.
Subject
European legal basis
Polish legal basis
1
Waste
catalogue
Commission Regulation (EC) No.
574/2004 of 23 February 2004
amending Annexes I and III to
Regulation (EC) No. 2150/2002 of
the European Parliament and of
the Council on waste statistics.
Regulation of the Minister of
Environment of 9 December
2014 on waste catalogue – Dz.
U. [Journal of Laws] of 2014
item 1923.
6
Marking and labelling the product with CE mark
6.1
Product compliance with the CE standard
Products manufactured by SELT company meet the essential requirements of the standard introduced by the
Polish Committee for Standardization as PN-EN 13561, which is confirmed by the manufacturer’s declaration
of performance and marking the product with the CE mark.
In order to maintain this condition and assure safe use and maintenance of the system, the installation and
operating manual and instructions for safe use must be observed.
6.2
Information accompanying the CE mark
a)
Marking in the product
SELT Sp. z o.o.
OPOLE, ul. Wschodnia 23A
EN 13561
