DT-E 11.11.1 BALCONY AWNING ITALIA BALCONY
Edition: March 2017, Issue 2
English
page 9 / 19
3.3
Preparation to installation
unpack product and check if it contains all necessary elements for installation,
make sure that the base where product will be mounted provides sufficient bearing capacity for safe
installation and operation of the product,
prepare set of tools necessary for installation.
3.4
General guidelines for installation
To avoid the risk of hand and fingers harm during opening and closing of the awning, the awning
should be installed on such height so that the lowest element of the awning after it is opened is at
least 2200mm above the ground,
The product should be protected against any stains made by e.g. silicon, mortar or mounting foam,
which may cause its damage,
Using any chemical substances containing bituminous substances or any other substances making
reactions with the product is forbidden,
In case of installation in public places, e.g. hospitals, schools, boarding schools etc. The placement of
switch/remote control device should be marked according to health and safety regulations,
