DT-E 1.1: SUN PROTECTION SCREEN – VENETIAN BLINDS C50 Slim
Issue 2 / April 2017 / EN
page 4 / 25
1.
INTRODUCTION
1.1.
PRODUCT SAFETY TIPS
The product was manufactured in accordance with the latest know-how in the area of constructing and manufacturing and
is delivered in condition allowing for its safe use.
Safe construction of the product is achieved by:
No.
Subject
European legal basis
Polish legal basis
1
Internal blinds. Performance
requirements including
safety
EN 13120:2009+A1:2014
PN-EN 13120+A1:2014-04
2
Essential requirements for
machines
Directive 2006/42/EC of the
European Parliament and the Council
Resolution of the Minister of Economy of
21 October 2008
DZ.U. [Journal of Laws] 2008 no. 199,
item 1228 as amended DZ.U. [Journal of
Laws] 2011.124
3
General product safety
Directive 2001/95/EC of the
European Parliament and the Council
DZ. U [Journal of Laws] of 12 December
2003, no. 229, item 2275 as ammended
Linked documents: Declaration of conformity and manual of installation and use of motors and control.
1.2.
NOTES ON SYMBOLS AND MARKS
The below symbols (icons) denote particularly important information concerning threats and safety.
Icon
Icon meaning
Information
INFORMATION
Prior to using the product, its operating manual should be read.
Following the operating manual guarantees:
- failure-free use of the product,
- warranty coverage against product defects.
Keep the operating manual for safety of people.
INFORMATION
No harmful or dangerous consequences for people or facilities.
ATTENTION!
A situation likely to cause product damage or other damage.
No threat for people.
WARNING!
Threat of danger
DANGER!
This symbol denotes all information concerning danger, failure to observe
which brings about threat to human life and health. Risk: threat of serious injury
or death. Dangerous operation which may cause injuries or product damage.
WARNING!
Threat to human life or health due to electric shock.
ENVIRONMENT
Marking on electric or electronic equipment subject to collection in designated
places.
