DT-E 1.4: SUN PROTECTION SCREEN – VENETIAN BLINDS Z90
Issue 2 / April 2017 / EN
page 34 / 58
1.
Before installation you must determine and mark location of the cover panel’s main brackets, so they don’t interfere
with lifting mechanisms and with the motor.
2.
Initially fix the auxiliary bracket to the main bracket. Then put them against cover panel, adjust to proper length and
tighten the screw. Picture 1.
ATTENTION: For the time of drilling side guide and mounting profile and fastening them with tapping/
self-drilling screws, you must remove gaskets from the side guide and protect them against damage.
Then, reinstall them.
b)
Installation
1.
Fix head rail bracket to the main cover panel bracket.
Fastened brackets put against cover panel, adjust to
proper height and screw together.
Picture 1
2.
Assembled cover panels with their brackets secure to the
wall/ niche with proper bolts.
3.
Tighten bolts of main cover panels to the wall/ceiling.
Picture 2
4.
Check level of mounted covers with their brackets, adjust
if necessary. Proper levelling of the assembled system is
essential for its proper operation.
Picture 3
