DT-E 1.4: SUN PROTECTION SCREEN – VENETIAN BLINDS Z90
Issue 2 / April 2017 / EN
page 45 / 58
5.
Install head rail brackets in the cassette.
Fig. 16
6.
Drill installation holes in guide rails according to
Fig.14.
NOTE:
Guide rails can be delivered pre-drilled if
agreed with advance. Preparation of mounting holes
is a service subject to additional costs.
Img. 2
7.
Install guide rail to the under-plaster cassette and
fasten it to the base or subconstruction.
Fig. 17
8.
Loosen screws of elastic brackets so that they are
easy to open.
9.
Slide head rail with bundle into guide rails, so that the
label „strona od okna” faces the window. Incorrect
installation of the bundle will cause incorrect
operation of the blind. For easier installation the
bundle can be tilted, so that the pins are not
damaged.
Img. 3
