DT-E 1.4: SUN PROTECTION SCREEN – VENETIAN BLINDS Z90
Issue 2 / April 2017 / EN
page 49 / 58
The engine has a thermal switch, which turns off the drive after about 4 minutes of continuous work to
protect against overheating. After turning off by the thermal protection appropriate time should pass
before turning on again, depending on the type of engine and atmospheric conditions (about 16
minutes).
4.6.3.
MANUAL DRIVE
Opening, closing and setting slats tilt angle is performed with the use of a crank.
Do not use excessive force when the blind reaches end position.
Crank should be secured with crank bracket.
1.
Cover panel main bracket
2.
Head rail
3.
Wall-grommet
4.
Gear
5.
Max 500mm
