DT-E 1.4: SUN PROTECTION SCREEN – VENETIAN BLINDS Z90
Issue 2 / April 2017 / EN
page 6 / 58
2.
PRODUCT TECHNICAL IN FORMATION
Product technical specification is available at
after log in.
2.1.
TECHNICAL PARAMETERS :
Dimensions:
Width
Height
Max. area
Electric drive
4500 mm
3200 mm
4500 mm
5000mm
Manual drive (max. 9m
2
)
4500 mm
5000 mm
9m
2
Slat
93,4 mm
12,9 mm
Available with extruded aluminium side guides
Manual drive
Crank
Made of anodized aluminium, the length equals to 2/3 system height
Electrical drive motor of the following parameters:
- supply voltage
230V/50Hz
- power
90 to 230 W (depending on the motor type and blind size)
- current consumption
0,4 to 1 A (depending on the motor type and blind size)
- protection level
IP 44, IP 54 (depending on the motor type)
- time of continuous work
4 to 6 mins (depending on the motor type)
- torque
6 Nm – 20 Nm (depending on blind size)
- rotation speed
24 or 26 rpm (depending on the motor type)
- work temperature
-25 to 70°C (depending on the motor type)
Installation:
Application
External
Installation place
To the niche (installation to the wall/ceiling) or on the building facade
Detailed data concerning individual motor parameters is available from manufacturer’s websites as well as on:
→ PRODUCTS → AUTOMATION
2.2.
PRODUCT CHARACTERIST ICS
Types of products:
Installed on the outside of the building, operated by a electromechanical drive connected with the operating
system,
Installed on the outside of the building, operated manually with a crank mechanism..
