SELVAS Healthcare, Inc.
50
_MEASUREMENT AND ANALYSIS
Note
1.
Press both start buttons for 2 seconds. Do not move or bend the arms until the
measurement is completed. Measuring time is within 1 minute.
2.
When the measurement is wrong,
Error message appears on the screen.
To measure again, hold the handle electrodes and press start buttons with thumbs.
If the measurement fails three times in a row, the message appears as below. "The
measurement can not complete due to the continuous errors. Step down from the
scale for the initialization.
Refer to ERROR & REPAIR part for the detail.
Result screen
After analysis is completed, the result is displayed on the screen.
The result is presented with graph and numerical value so it is understood easily.
Check the graph and numerical value of analysis result and press PRINT or NEXT button.
Printing the results and Restarting
1)
Once the result is displayed on the display, it can be printed out in pre-printed result sheet.
2)
After confirming the analyzed result, press NEXT button to restart.
3)
The device returns to the initial screen after one minute.
Summary of Contents for ACCUNIQ BC300
Page 1: ...English 06 2021 V3 01 User Manual BC300...
Page 71: ......
