User Manual BC300
INTRODUCTION_
7
Prohibition
The unit has previously been adjusted in the factory for optimum performance.
Do not attempt to adjust switches or any other things except those specified in this
manual for operation.
Caution
If you have experienced any trouble with the unit, switch it off immediately, and contact
our company or its authorized dealer for assistance.
Caution
If you plan to connect any device of other manufacturers electrically or mechanically to
the unit, contact our company or its authorized dealer for instructions before doing so.
When you connect computer or other system to the unit (RS-232C), the attached systems
should be those certified by IEC 950 or equivalent standards for data processing
equipment.
Configurations shall comply with the system standard IEC 60601-1:2005/A1:2012.
Everybody who connects additional equipment to the signal input part or signal output
part configures a medical system standard EN IEC 60601-1:2005/A1:2012.
If in doubt, consult the A/S department of local distributor.
Caution
Avoid the following environments for storage;
Where the ambient temperature falls -25
°
C or exceeds 70
°
C.
Where the atmospheric pressure falls below 70kPa (700mbar) or exceeds 106kPa
(1060mbar).
Where the humidity is over 93% non-condensing.
Where the unit is exposed to spray or splashing water.
Where the unit is exposed to dust.
Where the unit is exposed to water vapor.
Where the unit is exposed to salty atmosphere.
Where the unit is exposed to explosive gas.
Where the unit is exposed to excessive shocks or vibrations.
Where the angle of inclination of mounting surface exceeds 10 degrees.
Where the unit is exposed to direct sunlight.
Summary of Contents for ACCUNIQ BC300
Page 1: ...English 06 2021 V3 01 User Manual BC300...
Page 71: ......
