SELVAS Healthcare, Inc.
60
_STORAGE & MAINTENANCE
STORAGE & MAINTENANCE
1)
Pay attention to the allowable value to electric current.
2)
Avoid direct sunlight, humidity, dust, thick oil and salty or extreme changes in temperature.
3)
Do not install or store the device in a place where any chemicals or gas is stored.
4)
Do not use the device in any unstable, vibrating, or impact-giving area.
5)
Connect the earth placed on the backside of this device to terminal plate to prevent any electric shock
from leakage current or a potential difference.
6)
Do not put or drop anything on the device and avoid strong impact.
7)
Do not disassemble or remodel the device.
8)
If this unit has not been used for a long time, use this after confirming by an expert if all function
and appearance are in good condition.
9)
Do not splash any fluid on this device or insert any foreign substances.
10)
In case of inserting foreign substances or exposing to particular environment, this device must be
examined by an expert before use.
11)
Use the power cable, plug, and fuse that are offered by our company.
At this time, confirm the covering of cable, the state of plug connection, and other check points to
the things below.
RS 232C cable
USB port
Adapter
12)
When pulling out the power cable, turn off the power switch first and then pull the plug out.
13)
Storage ambient: Temperature -25 ~ 70
°
C, Humidity lower than 93 % (non condensing)
14)
Operation ambient: Temperature 5 ~ 40
°
C, Humidity 15 ~ 93 % (non condensing)
15)
Do not store or use this device under 70 kPa (700 mbar) or over 106 kPa (1060 mbar) of
atmospheric pressure.
16)
Cleaning & Disinfection
a.
Cleaning: Use a soft gauze cloth with volatile liquid like benzene and alcohol to clean it.
Clean it every 2~3days. Do not use a wet cloth.
Summary of Contents for ACCUNIQ BC300
Page 1: ...English 06 2021 V3 01 User Manual BC300...
Page 71: ......
