SELVAS Healthcare
52
_STORAGE & MAINTENANCE
STORAGE & MAINTENANCE
Pay attention to the allowable value to electric current.
Avoid direct sunlight, humidity, dust, thick oil and salty or extreme changes in temperature.
Do not install or store the device in a place where any chemicals or gas is stored.
Do not use the device in any unstable, vibrating, or impact-giving area.
Connect the earth placed on the backside of this device to terminal plate to prevent any electric shock
from leakage current or a potential difference.
Do not put or drop anything on the device and avoid strong impact.
Do not disassemble or remodel the device.
If this unit has not been used for a long time, use this after confirming by an expert if all function
and appearance are in good condition.
Do not splash any fluid on this device or insert any foreign substances.
In case of inserting foreign substances or exposing to particular environment, this device must be
examined by an expert before use.
Use the power cable, plug, and fuse that are offered by SELVAS Healthcare.
At this time, confirm the covering of cable, the state of plug connection, and other check points to
the things below.
RS 232C cable
USB port
Adapter
When pulling out the power cable, turn off the power switch first and then pull the plug out.
Storage ambient: Temperature -25 ~ 70
°
C, Humidity lower than 93 % (non condensing)
Operation ambient: Temperature 5 ~ 40
°
C, Humidity 15 ~ 93 % (non condensing)
Do not store or use this device under 70 kPa (700 mbar) or over 106 kPa (1060 mbar) of
atmospheric pressure.
1)
Cleaning & Disinfection
Cleaning: When cleaning, use a soft cloth but do not use volatile solvent like benzene and alcohol
or a wet cloth. Wipe out minute dust once per 2 ~ 3 days with a dry cloth.
