User Manual BC310
INTRODUCTION_
7
Warning
Physically disabled persons should not attempt to take measurements alone, but instead
should have their caretakers assist them in using the device.
Caution
The unit must be operated only by, or under supervision of a qualified person with
SELVAS Healthcare or our distributors.
Caution
If you have experienced any trouble with the unit, switch it off immediately, and contact
SELVAS Healthcare or its authorized dealer for assistance.
Caution
If you plan to connect any device from other manufacturers electrically or mechanically
to the unit, contact SELVAS Healthcare or its authorized dealer for instructions before
doing so.
When you connect computer or other system to the unit (RS-232C), the attached systems
should be those certified by IEC 950 or equivalent standards for data processing
equipment.
Configurations shall comply with the system standard IEC 60601-1:2005/A1:2012.
Everybody who connects additional equipment to the signal input part or signal output
part configures a medical system by standard IEC 60601-1:2005/A1:2012.
If in doubt, consult the A/S department of local distributor.
Caution
Avoid the following environments for storage;
Where the ambient temperature falls below -25
°
C or exceeds 70
°
C.
Where the atmospheric pressure falls below 70kPa (700mbar) or exceeds 106kPa
(1060mbar).
Where the humidity is over 93% non-condensing.
Where the unit is exposed to spray or splashing water.
Where the unit is exposed to dust.
Where the unit is exposed to water vapor.
Where the unit is exposed to salty atmosphere.
Where the unit is exposed to explosive gas.
Where the unit is exposed to excessive shocks or vibrations.
