43
2) How to Touch Handle Electrodes
- Grip the handle electrodes using your fingers and palms.
- The 4 electrodes should be touched equally.
- Stretch both arms and spread them 30° from the body.
3) Measurement Posture
- Step on the scale with bare feet. Stretch both arms and spread them 30° from the body.
- Press and hold the start buttons with your thumbs for 2 ~ 3 seconds to start the measurement.
Once measuring starts, release the start buttons and hold the same position until the
measurement is complete.
- Do not speak or move your body until the measurement is complete.
- Do not bend or shake your arms until the measurement is complete.
- The measurement will be stopped if contact with all eight electrodes is not securely maintained.
(O) Correct grip
(X) Imbalanced touch
(X) Grip with only palm
Note
If 8 electrodes are not perfectly touched during the measurement, the result is not
reliable or the device quits the measurement.
Note
1. When the subject has hands or feet that are too small to cover all electrodes
sufficiently for measurement, please pay attention to touch all electrodes fairly. How
one touches electrodes will affect the reliability of the analyzed value.
2. During measurement the subject should not be touched by another person or by
conductive materials.
3. If 8 electrodes are not perfectly touched during measurement, measuring is quit or the
data is not reliable.
Summary of Contents for Accuniq BC380
Page 1: ......
