Model 0205NANO Operation and Maintenance Manual
6
SEM | www.semshred.com
If the jam does not clear after three attempts, the unit will show the
JAM
icon telling
the user that the unit remains jammed. The
OPEN ACCESS DOOR TO CLEAR JAM
icon is displayed instructing the user to open the unjam access door and remove any
media from the unit.
The unjam door screw will need to be removed to allow
the unjam door to open. A special tamper-proof 5/32”
Allen wrench will be required to remove it.
The unit is equipped with safety sensors to disallow
operation while the unjam door is open. However, still
always de-energize the unit by unplugging the power
cord.
After unplugging the unit:
• Using a pair of pliers, reach into the cutting head and manually pull out the
jammed material.
CAUTION
: partially shredded material may be sharp. SEM
recommends cut resistant gloves.
o NEVER REACH INTO THE UNIT WITH YOUR HAND.
o NEVER PLACE YOUR HAND NEAR THE CUTTING SHAFT.
• Close the unjam door and replace the screw. This screw MUST remain in place
while the unit is operational. It is a safety guard.
Unjam Door
Screw
Cutting Shaft
Remove Jammed Media
Summary of Contents for 0205NANO
Page 2: ......
