background image

SAFETY FUNCTIONS 

Safety Devices

(1

) Auto-cut (Motor overheating protection)

When motor is locked or overloaded for a certain period of 

  time the motor overheat protection is activated to cut off  

the 

motor 

power. 

When 

activated a beep sounds and the  

  machine will stop. When motor is cooled the machine will 
  reset automatically and the alarm beeps again. 

(2) Cabinet Door Switch

This prevents the shredder from operating while cabinet door is open.

(3) Overflow Stop

When the waste basket becomes full the shredder 
automatically stops after leveling shredded material. 

(4) Auto Reverse

When exceeding the maximum sheet capacity the

  shredder may get jammed the shredder will stop and then  
  reverses automatically so that the jammed paper can be  
  removed. Pressing the REVERSE key also activates the  

reverse operation. 

(5) Circuit Breaker

To protect against circuit failure the motor is locked for a certain period of time, this
feature will protect the motor wiring from burnout and overload.

(6) Feed Opening Switch

The feed opening switch prevents the shredder from operating while the jammed
paper is being removed through its enlarged feed opening this operation uses the auto
reverse function.

For NATIONWIDE SERVICE call 1(800)225-9293 

10 

https://www.supplychimp.com

Summary of Contents for 1201CC




































Reviews: