SAFETY FUNCTIONS Cont…
Alarm and Beep
(1)
Acceptance Beep
It sounds on acceptance of key entry and when the machine status changes
The beep sounds intermittently every 5 seconds when paper
or foreign articles are detected near the feed opening while
the
shredder stops and the screen shown on the left is displayed.
Note: If this status lasts for more than 3 minutes, the
machine locks up temporarily and Error 1 is displayed.
(3) Status Information Beep
In the following occasions, the information beep sounds to notify the status
change
.
When the shredder starts evening out the waste chips
After detecting that the waste basket is full.
(2)
Alarm
When the auto-cut function is activated and when the
machine
restores
itself.
When an error is generated;
Note: for details of errors refer to page
For NATIONWIDE SERVICE call 1(800)225-9293
11
https://www.supplychimp.com
