background image

FORWARD 

This manual provides the operation procedures for the paper shredder Model 1201PF. 

Read this manual thoroughly before starting up the shredder. Keep this manual handy so 
that you can refer to it at any time. 

The signal words “Warning” and “Caution” found in this manual and on warning labels 
affixed to the shredder correspond to the degree of injury that may result. 

Indicates a potentially hazardous situation, if not 
avoided, could result in serious injury. 

Indicates a potentially hazardous situation which, if 
not avoided, may result in minor or moderate injury. 
It is also used to alert against property damage. 

In addition to the signal words mentioned above, following two symbols are used to 
indicate the prohibited actions and to highlight the important actions.

 <Example> 

Indicates prohibited actions. Example means “do not  

    dismantle 

the 

product”. 

    Indicates 

mandatory 

actions 

or restricted actions. Example  

    means 

“pull 

out 

the 

power 

plug”. 

DON NOT USED SHREDDER FOR ANY OTHER PURPOSE

 

THAN DESCRIBED IN THIS MANUAL.

 

For NATIONWIDE SERVICE call 1(800)225-9293 

https://www.supplychimp.com

Summary of Contents for 1201CC




































Reviews: