background image

TECHNICAL INFORMATION 

 
 

 

 

 

 

 

 

Do not shred paper clips  

 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

      The 

machine 

is 

approved 

by 

independent 

 

      Safety 

laboratories 

and 

is 

in 

compliance 

 

with the EC-regulations 98/37/EG,   

 

 

 

2006/95/EG and 2004/108/EG. 

 

 

 

 

 

 

 

Sound level information: 

 

 

 

 

 

 

The sound level at the work place is less than the    

      than 

the 

ISO 

7779 

standard’s 

maximum 

   

      permissible 

level 

of<70db 

(A).    

 

 

 

 

 

 

 

 

 

 

 

 

 

 

      The 

exact 

technical specifications can  

 

 

      be 

found 

on 

the 

technical 

specifications 

 

   

      stickers 

on 

the 

machine. 

 
      Subject 

to 

alterations 

with 

out 

notice. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
EC-declaration of conformity 
 
Herewith we declare that the Model 1324S and 1324P complies with the following provisions applying to it 
98/37/EG; 2006/95/EG; 2004/108/EG. 
 
Applied harmonized standards in particular EN 60950-1; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 
61000-3-3; EN ISO 12100-1; EN ISO 12100-2; EN 294; ISO 7779. 

19 

 
 
 

Summary of Contents for 1324P


























Reviews: