48
Annex 1
Connecting an existing external control device in your 9900X.
The 9900X offers you the capability of connecting an existing external de-
vice such as a pin-pad controller directly into the 9900X. This will have the
following advantage: No interference with the connection of your 9900X
with the copier; The 9900X will prevent the insertion of money while the ex-
ternal device is activated; The 9900X will keep track of the copies made this
way under the title Auxiliary reader in the audit.
SEM can provide you with the proper harness to connect your external de-
vice. Please contact our sales department. You must supply us with the
EXACT pin-out of the device’s harness. If you cannot send us the details, or
wish to make your own harness, please take note of the following: External
device harness connects to the 6-pin header J9 on the 9900X main board,
just behind the programming push buttons. Be careful not to misidentifying
with the 7-pin header J14 located between the buttons and J9. J9 header is
a Molex type. Pin #1 is located towards the top of the board. If you are
making your own harness, please refer to the pin-out below. Notice that pin
#1 also connects to pin #3. That is the external device detector. If you do
not jump pin #1 & 3 together, the Vend Station will ignore the presence of
the external device thus hiding any settings in the Value parameters menu.
If your external device is capable of detecting two price pulses, you will have
to use pins 4, 5, and 6 on header J9. If your device only has a single price
capability, then use pins 4 and 6 on J9.
The 9900X enables you to send multiple pulses per copy to the external de-
vice. Please refer to page 33 for more details on how to program the num-
ber of pulses to send.
Summary of Contents for 9900X
Page 1: ...www sem ca April 2017 Part i01081 Version 3 7...
Page 36: ...36...
