Kingfisher Plus+ Hardware Manual
CP-30 v2.x modules allow for a backup battery to be replaced by the user:
1. Obtain (purchase or order from Semaphore) a new battery.
WARNING. Only CR2450N batteries from Renata are specified for operating
temperature range from -40°C to +85°C.
2. Disassemble the CP-30 module and pull the PCB out from enclosure as per ‘
’ (steps 1 to 5).
WARNING. Follow Anti-Static Procedures to avoid permanent damage to the circuit
board components.
3. Remove old battery and safely dispose it of in accordance with your local regulations.
4. Insert the new battery all the way in into the battery holder observing correct polarity
(negative terminal of the battery should face PCB surface).
WARNING. Inserting battery in reverse polarity may permanently damage CP-30
module.
5. Reassemble the module as per ‘
Installing and Removing Option Boards
’ (steps 7 and 8).
Hardware Manual Version 7.16
http://www.servelec-semaphore.com/
Page 75