16
Chanun Ace User’s Guide
Configuration of Chanun Ace
1. Version
2. Voice recording
3. Video quality
4. Frame rate
5. Time display
6. Time display color
7. Image rotation
8. DTS
9. Time zone
10. Time setting
11. Impact sensitivity
12. Impact alarm
13. Movement detection
14. Loudspeaker volume
15. Format cycle notice
16. GPS
17. Security LED
To display Chanun’s firmware version.
To enable/disable the storage of sound at the time of recording (On/Off)
To set the quality of recorded videos (High/Middle/Low)
To set the frame rate of recordings (20).
To determine if time information is included in recording. (Enable/Disable)
To choose the color for displaying recorded time (White/Black).
To reverse the position (top/down) of the split screen (ON/OFF).
For countries that adopt the summer time (overseas).
To select a city for setting current time.
To set current time displayed on the black box in the form of YY/MM/DD/Time.
(Please check the box on the left side.) Use this function in case the time displayed on recorded files is incorrect.
※ You should consider a time duration required to install the SD memory card into your black box when you determine current time.
To determine the sensitivity for storing impact images (Very high/Very low/low/medium/high)
To determine whether the alarm is set to go off at the time of an impact (ON/OFF).
To set the sensor so as to detect movements in the Parking mode (ON/OFF).
(This function enables you to make efficient management of the memory as the black box saves only movements in the Parking mode.)
- Loudspeaker volume: To set the volume (OFF/Low/Middle/High).
To inform you of the format cycle when an error occurs with the SD card or for improvement of its service life.
-
Automatic: To give notice of the format cycle automatically.
-
Fixed (1st and 15th day): To give notice of the format cycle on the 1st and 15th days of each month (Regular formatting is recommended).
-15th day: To give notice of the format cycle on the 15th day of each month (Regular formatting is recommended).
-
No notice: To disable the function.
To help the black box save the vehicle’s location and travel speed together with the video (ON/OFF).
in Driving mode (ON: light on/ OFF: light off);
in Parking mode: the light blinks regardless of the set value.
