36
Notes:
1. The call being placed on hold can only be “un-
hold” by the handset that puts it on hold.
2. Handset LCD displays a call is being on hold.
An alert tone (double beep) every 30 seconds
will remind the handset that a call is being on
hold.
3. If the operation (e.g., call transfer) after putting a
call on-hold fails, the held call may be dropped.
4. You can power off the handset (e.g., change
battery) while call is on hold. After power on
again, you can continue the call by pressing
UNHOLD (Left) soft key or select “3” from the
Option menu to terminate the hold state.
Mute
1. After a link is established, you can press Mute (Left)
soft key to mute the handset microphone.
2. When mute is active, the other end will not hear
your voice, but still can speak to you.
3. To leave the mute state, press “Unmute” (Left) soft
key.
Note
: Mute is effective only for the current call. It is
automatically turned off after the call is ended.
Do Not Disturb (Silent Ring)