49
3. The base station recognizes that Handset 15 is
busy. Instead of announcing to Line 4 that Handset
15 is busy, the base sends an alert to Handset 15.
4. Upon receiving the alert, the handset sounds an
audible double beep alert and LCD displays “New
call on Line 4”.
5. Handset 15 can:
a. Ignore the new call; continue talking to Line 1.
b. Press FLASH key to switch to Line 4.
c. Subsequent pressing of FLASH key will toggle
between Line 1 and Line 4.
d. Press END key while talking to a line will
terminate that particular call and automatically
switch back to talking to the remaining line.
Notes:
1. This built-in call waiting is separate from the Call
Waiting feature available from the local phone
company. The phone company provided Call
Waiting functions on the same phone line, while the
Call Waiting functions on two separate phone lines.
2. This feature only works for 2 lines, if a 3
rd
phone call
comes for the same handset, the call will not be
routed to the handset.
3. It is recommended to order from the local phone
company Hunt Group feature for all your lines and
not subscribe to the Call Waiting feature.
AA Configuration by Administrator
1. Administrator can change the following AA settings:
•
Record/playback new main greeting message.
•
Set number of rings before AA picks up a call.
