34
ENAMEL RATER MANUAL: V.10
SWITCH
SW1/7
SWITCH
SW1/8
SELECTION
OFF
OFF
PRINTOUT OFF
OFF
ON
PRINTOUT ON-9600 BAUD
ON
OFF
PRINTOUT ON-1200 BAUD
ON
ON
PRINTOUT ON-300 BAUD
Having enabled the 's printer port and selected the printout
Format (see Section 6.6), the should be connected to a
printer configured as described in Section 6.4. The will
transmit data to the printer when SAVE is pressed after
BATCH/STATS. At this point the values of the cans rated in the
batch, the statistical conformation and the line number, if enabled,
will be printed.
6.6
SELECTING THE PRINTOUT FORMAT
The printed output is arranged in columns according to the settings
of SW1/5 and SW1/6 on the micro board (refer to Appendix A Fig
1). The relationship is given in the table below:
SW1:5
SW1:6
COLUMNS
OFF
OFF
1
OFF
ON
4
ON
OFF
6
ON
ON
8
The statistical information selected by SW11/1 and SW11/2 on the
applications board will also be printed (refer to Appendix A Fig 1
and Section 4.2).
If the prompt for line number option has been selected (See section
4.8) then the line number will be included on the printout.
