- 10 -
04/2019
Copyright © 2019, Fast ČR, a.s.
Note:
The above food processing times are only a reference. The actual blending
time depends on the size of the ingredients, their amount and the required
final consistency.
CLEANING AND MAINTENANCE
■
Before cleaning the food processor, always switch it off by setting the speed control
knob
A13
to the OFF position and disconnect it from the power socket.
■
Disassemble the food processor into its individual parts. Wait until moving parts
come to a complete stop before disassembly.
■
Thoroughly wash the used removable parts after every use using warm water with
a neutral dishwashing detergent. Then rinse them under clean running water and
wipe them dry with a fine wiping cloth or allow them to dry naturally. After washing
and drying, we recommend to coat the grinding blade
B6
and the grinding plates
B8
,
B9
and
B10
with cooking oil.
■
If you whisked egg whites, first rinse the bowl
A11
and the beater
A4
or
A6
under
cold water. If you were to use hot water, the egg white remains would harden and
their removal would be more difficult.
■
Clean the mixing container
C4
by filling it with 0.5 litre of clean water and a few
drops of kitchen detergent and then assemble the blender and run it for 10 to
15 seconds. Then turn off the food processor, disconnect it from the power socket,
and after the rotating parts have come to a stop, remove the blending jar assembly.
Empty out the contents of the blending jar
C4
and then thoroughly rinse out the
blending jar
C4
with clean water and wipe dry.
■
If more thorough cleaning is required, the cuff
C5
with blade assembly
C6
may be
removed using a special wrench that can be ordered free of charge at an authorised
service centre. After cleaning, it is necessary to install the cuff
C5
with blade
assembly
C6
back in its place and to properly tighten it using the wrench.
Attention:
When cleaning, be very careful not to injure yourself on the sharp cutting
edge.
■
The metal parts of the meat grinder, the blade assembly
C6
and attachments
A3–
A6
are not intended for washing in a dishwasher. Other removable parts may be
washed in a dishwasher.
■
For cleaning the base unit
A12
and the multi-function head
A8
, use a cloth lightly
dipped in a weak detergent solution. Then wipe everything with a clean dampened
cloth and thoroughly wipe dry.
■
For cleaning, do not use solvents or cleaning agents with abrasive effects. Otherwise,
the surface of the appliance may be damaged.
■
Do not submerge the food processor or its power cord in water or any other liquids.
STORAGE
■
When not using the food processor, store it in a clean, dry place out of
children’s reach. Make sure that the multi-function head
A8
is tilted down into the
horizontal position.
TECHNICAL SPECIFICATIONS
Rated voltage range ............................................................................................................220−240 V
Rated frequency........................................................................................................................50/60 Hz
Rated power input .....................................................................................................................1 000 W
Electrical shock protection class ........................................................................................................II
Noise level ....................................................................................................................................85 dB(A)
The declared noise emission level of the appliance is 85 dB(A), which represents a level
A of acoustic power with respect to a reference acoustic power of 1 pW.
Explanation of technical terminology
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty insulation.
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling hand over
these appliances to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and
human health, which could result from improper waste disposal. Ask your local
authorities or collection facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic appliances, ask your retailer or supplier
for the necessary information.
Disposal in other countries outside the European Union
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
