- 7 -
04/2019
Copyright © 2019, Fast ČR, a.s.
EN
Food Processor
User's manual
■
Prior to using this appliance, please read the user’s manual thoroughly, even if you
already have experience in using similar appliances. Only use the appliance in the
manner described in this user’s manual. Keep this user’s manual in a safe place
where it can be easily retrieved for future use.
■
We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE APPLIANCE AND ACCESSORIES
A1
Button for releasing the meat
grinder from the front attachment
hub
A2
Removable cover of the front meat
grinder attachment hub
A3
A-shaped beater
A4
Balloon whisk
A5
Kneading hook
A6
Elastic A-shaped beater
A7
Removable cover of the top blender
attachment hub
A8
Tilt-out multi-function head
A9
Attachment hub for attaching
attachments
A3-A6
A10
Transparent bowl cover with a hole
for adding ingredients
A11
4.5-litre stainless steel bowl with
handle
A12
Base unit
A13
Speed control knob serves to
variably set the speed level
MIN-1-2-3-4-5-6-MAX, sets the pulse
level
(PULSE) and turns the appliance off
(OFF).
A14
Multi-function head release lock
A15
Minus “-” button for decreasing time
A16
Plus “+” button for increasing time
A17
Display
A18
Start/Pause button
A19
Anti-slip feet for stability of the
appliance during operation
A20
3-litre stainless steel bowl without
handles
A21
Lid serves to close the stainless steel
bowl
A11
for short term storage of
processed ingredients.
DESCRIPTION OF MEAT GRINDER ACCESSORIES
B1
Pusher
B2
Stainless steel hopper
B3
Feed tube
B4
Grinding chamber
B5
Screw shaft
B6
Grinding blade
B7
Screw ring
B8
Fine grinding plate
B9
Medium fine grinding plate
B10
Coarse grinding plate
B11
Separator
B12
Sausage stuffer attachment
B13
Moulder
B14
Conical attachment
B15
Cookie maker
B16
Cookie maker holder
Note:
Parts
B11
–
B14
are contained inside the pusher
B1
.
Certain models are only equipped with a fine and coarse grinding disc
B8
and
B10
.
DESCRIPTION OF THE BLENDER ACCESSORIES
C1
Inner cap of the blending jar
C2
Outer lid of the blending jar with
a hole for adding ingredients
C3
Handle
C4
1.5-litre Tritan blending jar with
titanium blades
C5
Cuff
C6
Blade assembly
BEFORE FIRST USE
1. Take the appliance and its accessories out of the packaging materials.
2. Thoroughly wash all accessory parts that are intended to come into contact with
food using warm water and a neutral kitchen detergent. Then rinse under clean
running water and thoroughly wipe dry with a fine wiping cloth or allow them to
dry naturally. After washing and drying, we recommend to coat the grinding blade
B6
and the grinding plates
B8
–
B10
with cooking oil.
3. Do not submerge the food processor or its power cord in water or any other liquids.
Attention:
The metal parts of the meat grinder and attachments
A3
–
A6
are not
intended for washing in a dishwasher. Other removable parts may be
washed in a dishwasher.
BEATING, WHIPPING AND KNEADING
SELECTING ATTACHMENT TYPES
Attachment type Purpose of use
Beater
A3
and
A6
It is used for beating light and medium heavy yeast-free
doughs, for preparing sauces, creams, fillings, etc.
Do not use it
for kneading heavy doughs.
Balloon whisk
A4
It is used for whisking whole eggs or egg whites, whipped
cream, foamy creams, etc.
Do not use it for beating or
kneading doughs.
Kneading hook
A5
It is used for kneading various types of doughs including heavy
and thick doughs such as for example bread dough, pizza
dough, fresh pastry doughs, etc.
ASSEMBLING AND DISASSEMBLING THE FOOD PROCESSOR
■
Before you start assembling or disassembling the food processor, check that it is
turned off and disconnected from the el. power socket.
1. Inserting the bowl and attaching the cover
1.1 Place the food processor on an even, dry and stable surface, for example on
a kitchen countertop.
1.2 Use the lock
A14
to release the multi-function head
A8
and tilt it out all the way.
After tilting out the multi-function head
release the lock
A14
. Locking of the
multi-function head in the top open position is indicated by the lock returning to
the default position, which is accompanied by an audible click.
1.3 Insert the stainless steel bowl
A11
into the base unit
A12
and secure it in place by
turning it clockwise. When the bowl is properly attached, it cannot be separately
lifted out of the base unit.
1.4 On to the bottom part of the multi-function head
A8
with attachment hub
A9
,
slide the cover
A10
so that the latches along the perimeter of the round opening
in the cover
A10
slide into the grooves along the perimeter of the attachment
hub
A9
.
1.5 The lid
A21
is used for covering the bowl
A11
for short term storage of processed
ingredients.
2. Mounting attachments
2.1 When attaching an attachment, the multi-function head
A7
must be locked in
the open position, see point 1.2 in the previous chapter. To attachment hub
A8
,
attach one of the attachments
A3
–
A5
in such a way that the attachment hub
shaft
A8
slides into the attachment. Push the attachment towards the attachment
hub
A8
and turn it anticlockwise to secure it in place. Lightly pull the attachment
downwards with one hand to check that it is properly attached.
2.2 Place the ingredients that you wish to process into the bowl
A11
. Release the
lock
A14
and tilt the multi-function head
A8
to a horizontal position. After tilting
down the multi-function head
A7
, release the lock
A13
. The locked status of the
multi-function head
in the tilted down work position is indicated by the lock
returning to the default position. This is accompanied by an audible click.
3. Disassembly
3.1 Use the lock
A14
to release the multi-function head
A8
and tilt it out all the way.
After tilting out the multi-function head, release the lock. Locking of the multi-
function head in the top open position is indicated by the lock returning to the
default position, which is accompanied by an audible click.
3.2 Push the attachment towards the attachment hub
A9
and turn it clockwise to
release it, and then remove it. Turn the bowl
A11
anticlockwise and remove it
from the base unit
A12
. Remove the cover
A10
by pulling it downwards. Move
the multi-function head
A8
back to the horizontal position.
USING THE FOOD PROCESSOR
1. Select the right type of attachment based on its intended use and assemble
the appliance according to the instructions in the chapter Assembling and
disassembling the appliance. Place the ingredients into the bowl
A11
.
Attention:
In a single batch, it is possible to precess no more than 2.2 litres of light
dough or 0.8 litres of thick, heavy dough. The maximum number of egg
whites that can be whisked at once is 12. We recommend that you do not
fill the bowl
A11
past the level of the 3l mark. If an insufficient amount of
ingredients are put in the bowl
A11
(less than 0.3 litres of dough), then they
may not be optimally processed.
2. Make sure that the multi-function head
A8
is tilted down in the horizontal working
position and that the speed control knob
A13
is set to the OFF position. Connect the
power cord to a power socket.
3. Set the required speed using the speed control knob
A13
. Gradually turn the
speed control knob
A13
clockwise to increase the speed, turning it in the opposite
direction will reduce the speed. To initially stir in the ingredients, first set a lower
speed and then adjust it as required. Electronic speed regulation ensures that the
set speed will be maintained under various loads. While it is running, ingredients
may be added into the bowl
A11
through the hole in the cover
A10
.
4. The pulse mode is used for increasing the speed to maximum for a short time. To
activate the pulse mode, turn the speed control knob
A13
to the PULSE position and
to ensure continuous operation hold it down in this position. As soon as you release
the speed control knob
A13
, it will automatically return to the OFF position.
5. If it is necessary to wipe ingredients off the inside of the mixing bowl
A11
and the
attachment, first turn off the food processor by setting the speed control knob
A13
to the OFF position and then disconnect it from the power socket. Wait until
the rotating parts come to a stop and only then scrape away the ingredients with
a spatula.
6. After you have finished using the appliance, set the speed control knob
A13
to the
OFF position and disconnect the power cord from the power socket.
7. Wait until the rotating parts come to a stop and disassemble the food mixer
according to the instructions included in chapter Assembling and disassembling
the appliance. Use a soft plastic spatula to empty out the contents of the bowl
A11
.
8. Clean out the food processor after each use according to the instructions in chapter
Cleaning and maintenance.
LED LIGHT
■
The multi-function head
A8
has a LED light that turns on automatically when the
food processor is connected to a power socket. The LED light turns off automatically
after 2.5 minutes of inactivity, i.e. when the appliance is not running or when the
speed is not set during this time. The LED light turns on again automatically when
the food processor is put into operation by the control knob
A13
being set to
a desired speed level. DISPLAY
