EN 11
EN
Revision 05/2021
Copyright © 2021, Fast ČR, a. s.
Viewing and setup
When the unit is in the View mode (press MODE twice), the last executed file
(recording or photo) is first prepared for viewing. You can scroll through the files with
the UP / DOWN buttons and select by pressing OK. Press OK to stop the recording
playback.
Delete
In playback mode, you can delete the currently displayed file. Press the MENU
button. In the menu that appears, select whether to delete this single file. Then
press OK to confirm your intention or select Cancel to reject in the next menu.
Write-protected files cannot be deleted directly, you must first unlock them.
Protection
In playback mode, you can also manually protect the currently viewed file from
being deleted by the system. Press the LOCK button. Press LOCK again to unlock
the file. Locked files are protected against deletion, but any formatting of the card
will permanently delete all content, regardless of protection.
If you only want to delete some of the protected files, you must unlock them
before deletion. Similarly, to delete the files locked by the system (by the G-sensor
command), they must be unlocked first.
