background image

EN 13

EN

 06/2016

 2016

Remote control

30. AUDIO button
 DTV/MEDIO 

mode

: select a background sound if available.

 ATV 

mode

: select a sound mode: Stereo / Dual I/II / Mono.

 Other 

sources

: select left/right channel

31. SUBTITLE 

button

 

Press to show/hide subtitles in the bottom part of the screen, if they are available. 

32. AUTO/REC button
 AUTO 

button

: used for automatic confi guration in PC mode.

 REC 

button

: press to start recording (only DTV mode).

33. PVR button

 

It is used to enter/exit the PVR setting menu.

Note:

Remove batter during storage or when you are not using the device for a long time.
To control the device using the remote control, point the remote control at the 
device and then press the button with the required function. The maximum range 
of the remote control is about 5 meters with a deviation of up to +/- 30° from the 
perpendicular direction to the reception sensor of the remote control on the front side 
of the device. The falling capacity of the batteries gradually reduces the remote control 
range. There must be no solid obstacles in the area between the remote control and 
the device when the remote control is being used. During standard use the lifetime of 
batteries in the remote control is about 1 year. When the effective range of the remote 
control is substantially reduced, or when there are problems with its use, change both 
the batteries in the remote control. If you are not using the remote control for a longer 
period of time, take out both batteries from it – in this way you will prevent potential 
damage caused by their leakage.
Avoid strong impact of light (e.g. sunlight or light from strong fl uorescent/saving 
sources) which can reduce the effectiveness and reliability of IR remote control.

Summary of Contents for SLE3217TC























































Reviews: