EN 3
EN
06/2016
2016
Important safety instructions
Installation, operation
–
Install the appliance according to the instructions in the user’s manual.
–
Leave free space on all sides of the appliance necessary for proper air circulation.
This removes the heat created during operation. Covering the ventilation openings
of the appliance’s case creates a risk of overheating or damaging the appliance.
It is necessary to ensure that the ventilation openings are not blocked, e.g. by
a newspaper, table cloth, curtain, etc. Follow the installation instructions in the
user’s manual.
–
This appliance should not be located in a confi ned area such as a bookshelf or rack, if
suffi cient ventilation is not provided for or the instructions of the manufacturer are not
followed.
–
Never insert any items into any ventilation or other openings because they could
come into contact with points with dangerous voltage levels or cause a short circuit of
parts, which could cause a fi re or injury by electric shock. Never pour any liquid into
the appliance.
–
Do not install the appliance in direct sunlight or near sources of heat, such as
heaters, heat exchangers, stoves or other appliances (including amplifi ers) producing
heat. High temperatures signifi cantly reduce the lifetime of electronic components in
the appliance. Do not use or leave the appliance in the vicinity of an open fi re.
–
The appliance must not be exposed to dripping or running water and objects fi lled
with water must not be placed on it, e.g. vases. Protect the appliance against rain,
spray or contact with any other liquid, do not leave or install the appliance outdoors.
Do not use the appliance outdoors. Not adhering to these instructions creates a risk of
electrical shock or fi re hazard.
–
Do not use this appliance near water.
–
Treat the glass panel and appliance cover with care. The screen glass can break on
impact and cause serious injuries.
–
Make sure that the power cord is not stepped on or compressed, particularly near the
power plug, power socket and at the point where it exits the appliance or the adapter.
The power plug (adapter) is used as a disconnection device and must be easily
accessible.
–
Never use a appliance with a damaged power cord or plug. If the power cord or plug
are damaged, turn off the appliance, disconnect it from the power source and contact
an authorised service centre. A damaged power cord or plug may only be replaced
by qualifi ed personnel. Under no circumstances attempt to replace the power cord or
plug yourself.
–
Do not attempt to circumvent the polarised power plug safety feature. If the power
plug cannot be inserted into your power socket, contact a qualifi ed electrician to
replace the old type of power socket.
–
Before connecting the appliance into a power socket, check that the voltage in your
power socket corresponds to the voltage on the rating label of the appliance or on
its power adapter. If you are not certain about the type of the power sources in your
home, contact your vendor or the local energy company.
Summary of Contents for SLE3217TC
Page 1: ...LED Television SLE3217TC USER S MANUAL EN ...
Page 2: ......
