background image

Milk Frother and Warmer 

SMF 2020WH

EN

EN-7

 2018

 

 

 11/2018

Operating 
mode

Duration Attachment 

type

Starting the operating mode and its progress

Frothing and 
heating milk

approx. 
2 min

Frothing 
attachment 
A

7

Press the button A

4

 once. The indicator light 

A

3

 will be lit blue. The attachment A

7

 will 

rotate to prevent milk from sticking to the 
inner wall of the kettle and to form froth on 
the surface of milk. The milk will heat up to 
a temperature of 65 °C at which the milk does 
not burn and its fl avour characteristics are 
maintained. 

Heating 
milk without 
frothing

approx.
3 min

Stirring 
attachment 
A

8

Press the button A

4

 once. The indicator light 

A

3

 will be lit blue. The attachment A

8

 will 

rotate to prevent milk from sticking to the 
inner wall of the kettle. The milk will heat up 
to a temperature of 65 °C at which the milk 
does not burn and its fl avour characteristics 
are maintained.

Frothing 
milk without 
heating

approx.
1.5 min

Frothing 
attachment 
A

7

Press and hold the switch button for 2s. 
The indicator light A

3

 will fl ash blue. The 

attachment A

7

 will rotate to form froth on 

the surface of milk. 

Note:

The operation of the appliance can be interrupted at any time by pressing the button A

4

.

6)  The operating mode will end automatically and the appliance will switch to the stand-by mode. 

The indicator light A

3

 will be lit red. 

7)  Carefully remove the lid A

1

 and pour the milk out into a prepared container.  

Note:

Do not repeatedly heat up the milk. Always use a new batch of cooled milk for the next heating 
operation.

8)  Clean out the inside area of the kettle A

2

 after each use according to the instructions in chapter 

Cleaning and maintenance.

9)  Before turning the appliance on again, wait approx 3 minutes. If the appliance is turned on 

5 times in sequence without a break, the indicator light A

3

 will be lit blue and fl ash. The button 

A

4

 is temporarily out of operation. This is a safety function to prevent the appliance from being 

damaged. After 5 minutes the appliance will switch to the stand-by mode and will be ready for 
further use. The indicator light A

3

 will be lit red.

10)  If you will not be using the appliance, disconnect the power cord from the electrical power socket.

Summary of Contents for SMF 2020WH











Reviews: