12 EN
EN
Revision 08/2017
Copyright © 2017, Fast ČR, a. s.
Putting into operation and using
5. Putting into operation and using
Leave the unit turned off and make connections as you need -
especially connecting to your TV and internet.
5.1 Controlling
applications
To confi rm the selection, remote controller’s “OK” button is usually
used. In some cases, switching to mouse control mode to confi rm
the selection with mouse is required.
Recommendation: To easily control the unit, we recommend
connecting wireless mouse and keyboard.
5.2 Putting into operation
1)
when done with the wiring, connect the power adapter to
your power outlet and connect its plug to the unit’s power
socket. On the connected TV, select the input to which
you have connected your unit’s output.
Note:
The HDMI output takes priority over the Video output
(CVBS). If the HDMI output is connected to your TV, the
Video output (CVBS) is disabled. To enable, it’s necessary
to unplug the HDMI cable from the unit’s output.
2)
press the remote controller button to turn the unit on.
After a while, the operating system will boot with and
the basic screen appears. After initial connection, basic
function setup wizard will launch. The wizard start-up
may take several minutes.
3)
navigate through the setup wizard and set the following
items step-by-step (after each step, select Next): user
interface language, image size, internet connection
method (select either wireless WiFi or cable Ethernet;
the network protocol does not allow to enable both
methods simultaneously), when connecting to WiFi, enter
your network password (for details, please contact your
administrator).
Summary of Contents for SMP 5001 PRO
Page 1: ...USER S MANUAL EN ANDROID MULTIMEDIA PC SMP 5001 PRO ...
Page 2: ......
Page 9: ...EN 9 EN Revision 08 2017 Copyright 2017 Fast ČR a s Remote control ...
Page 24: ......
