background image

- 2 -

 

11/2019

 Copyright © 2019, Fast ČR, a.s.

EN

Steam station 

Important safety instructions

READ CAREFULLY AND STORE FOR FUTURE USE.

General warnings

 

This appliance may be used by children 8 years of age and older and by persons 

with physical or mental impairments or by inexperienced persons, if they are 

properly supervised or have been informed about how to use the product in a safe 

manner and understand the potential dangers.

 

Children must not play with the appliance. Cleaning and maintenance performed 

by the user must not be performed by unsupervised children.

 

In the event that the power cord is damaged, have it repaired at a professional 

service centre to prevent causing a dangerous situation. It is forbidden to use the 

appliance if it has a damaged power cord.

 

Always disconnect the power plug of the steam station from the power socket 

when leaving it without supervision, when filling up or emptying the water tank 

and when you have finished using it.

 

The water tank lid must not be open when ironing. The refilling of the water tank 

is described in chapter FILLING THE WATER TANK.

 

The steam station must not be left within the reach of children younger than 8 

years of age, when it is connected to mains electricity or while it is cooling down.

 

The steam station must not be left without supervision when connected to 

a power socket.

 

The steam station and the iron may be used only on a stable, even surface. When 

putting the iron aside away from the steam station, check that the surface on 

which it is located is stable.

 

The water tank lid must not be open when ironing.

 

Neither the steam station nor the iron may be used if it has fallen on the floor, 

exhibits visible signs of damage or if it is leaking.

Electrical safety

 

Before connecting this steam station to a power socket, make sure the voltage 

stated on its rating label corresponds to the voltage in your power socket.

 

Connect the steam station only to a properly grounded power socket. Do not use 

an extension cord.

 

Do not touch the steam station and the iron with wet or damp hands when it is connected to a power socket.

 

Always disconnect the steam station from the power socket when leaving it 

without supervision, when filling up or emptying the water tank and when you 

have finished using it. 

Summary of Contents for SSI 0710VT








Reviews: