- 3 -
11/2019
Copyright © 2019, Fast ČR, a.s.
■
Prior to disconnecting the steam station from the power socket, always turn off
the steam station using the appropriate button.
■
To avoid potential injury by electrical shock, do not clean the steam station or the
iron under running water, do not spray it with water and do not submerge it in
water or any other liquid.
■
Ensure that power cord does not come into contact with water, moisture or the
hot surfaces of the steam station or iron.
■
Do not place heavy items on the power cord. Make sure the power cord does not
hang over the edge of a table or that it is not touching a hot surface or sharp
objects.
■
Disconnect the steam station from the power socket by gently pulling the plug,
and not the power cord itself. Otherwise, this could damage the power cord or the
socket.
■
Do not pull or carry the iron by the power cord.
■
To avoid the danger of injury by electrical shock, do not repair the steam station or
iron yourself or make any adjustments. Have all repairs performed at an authorised
service centre. By tampering with the product you risk voiding your legal rights
arising from unsatisfactory performance or quality warranty.
■
Always turn off the steam station and disconnect it from the power socket when
you have finished using it.
Safety during use
■
This steam station is designed for home use. Do not use it in industrial surroundings
or outdoors.
■
Do not place the steam station or the iron on or near an electric or gas stove or
other sources of heat.
■
To carry the steam station use the carry handle exclusively.
■
Never iron clothing on a body.
■
Do not touch the hot ironing surfaces. Otherwise, this could cause burns.
■
Do not touch the iron rest surface on the steam station if the iron was placed on it
directly before use. The surface may be very hot.
■
Never fill the water tank directly underneath a water tap with the entire steam
station. To fill directly underneath a water tap, always slide the water tank out of
the steam station. Never add vinegar, descaling agents or other additives to the
water tank.
■
Prior to cleaning or any other handling of the steam station that you have
disconnected from the power socket, allow the soleplate of the iron to cool down.
