EN-10
EN
Steam iron
SSI 2027BL / SSI 2028YL
06/2019
Copyright © 2019, Fast ČR, a.s.
Note
:
If you wish to use the spraying function for dry ironing it is necessary to fill the water tank . To fill
the water tank follow the instructions in chapter Steam ironing, point 1 . Filling the water tank .
TIPS FOR QUALITY IRONING
•
Do not fill the washing machine drum with too much laundry, otherwise it will be overly crumpled
up . You can also avoid overly crumpled laundry by setting a lower spin drying speed .
•
If you are ironing fabrics from blended materials (e .g . 40 % wool and 60 % synthetic material), set
the temperature control dial according to the material which is ironed at a lower temperature .
•
If you do not know the composition of the fabric, identify the suitable temperature control dial
setting by ironing a piece of the fabric from the underside . Start by setting the temperature control
dial at a low temperature and gradually increase it until the ideal temperatures is achieved .
•
Never iron over places that have sweat marks or other stains . The high temperature fixes the stain
making it difficult to remove .
•
To avoid silk, wool and synthetic fabrics from being shiny after ironing, iron them from the
underside .
•
Some materials are easier to iron when they are lightly damp (e .g . silk) .
•
Dampen fine fabrics with the spray before ironing them or iron them under a lightly damp wiping
cloth .
MAINTENANCE AND CLEANING
Cleaning the exterior parts of the iron
•
Before cleaning the iron, disconnect it from the power socket . Allow the ironing surface to cool
down and empty the water tank .
•
Wipe the ironing surface and the housing of the iron with a lightly damp wiping cloth . Then wipe
all parts until dry .
•
Do not use metal items or abrasive cleaning products for cleaning .
Removal of limescale deposits
•
For the removal of limescale deposits from the steam chamber the iron is equipped with a Self-
Clean function . Use the Self-Clean function regularly at least once per month .
•
Fill the tank A
0
with water up to approximately half its capacity . Check that the output steam
regulator A
4
is set to position
. Connect the iron to a power socket . Set the temperature
control dial A
9
to maximum and wait until the control light A
8
turns off . Disconnect the iron
from the el . power socket and hold it in a horizontal position above the sink . Turn the output
steam regulator A
4
to the position marked by the symbol of an iron underlined by dots . Steam will
start to be emitted from the ironing surface and water will drip out . Slightly move the iron from
side to side, until its contents are emptied completely . Together with the dripping water, limescale
deposits will be removed from the steam chamber . Turn the output steam regulator A
4
back to
position
. Allow the iron to cool down and then wipe the ironing surface dry using a clean cloth .
STORAGE
•
Unplug the iron from the el . power socket and let it cool completely . Empty the water tank and
store the iron in a vertical position in a safe place .
