Table Mixer
STM 3620WH-NAA1 / STM 3621GR-NAA1 / STM 3622BL-NAA1 / STM 3623OR-NAA1 / STM 3624RD-NAA1
STM 3625VT-NAA1 / STM 3626YL-NAA1 / STM 3627TQ-NAA1 / STM 3628RS-NAA1 / STM 362XXX-NAA1
EN
EN-5
2015
07/2015
PLANETARY MIXING SYSTEM
•
The planetary mixing system is based on the principle of dual rotation of the attachment . The
attachment rotates anticlockwise along the inner perimeter of the bowl while rotating around
its own axis in the opposite direction . This ensures that ingredients inside the bowl are processed
thoroughly and evenly .
BEFORE FIRST USE
1 . Take the appliance and its accessories out of the packaging materials .
2 . Thoroughly wash all parts that are intended to come into contact with food (dough hook A
1
,
whisk A
2
, beater A
3
, the stainless steel mixing bowl A
4
and pouring shield A
6
using warm
water and a neutral kitchen detergent . Then rinse them with clean water and dry thoroughly with
a fine wiping cloth .
SELECTING ATTACHMENT TYPES
ATTACHMENT TYPE
PURPOSE OF USE
Dough hook A
1
It is used for kneading and preparing heavy and thick doughs containing
yeast, e .g . bread dough .
Beater A
3
It is used for mixing medium heavy and lighter doughs not containing yeast,
for mixing sauces, creams, fillings, etc .
Whisk A
2
It is used for whisking whole eggs or egg whites, whipped cream, light
doughs, foamy creams, etc . Do not use it for mixing heavy and thick doughs .
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
•
Before you start assembling or disassembling the food mixer, check that it is turned off and
disconnected from the el . power socket .
1. Inserting the mixing bowl
1 .1 Place the food mixer on an even, dry surface, for example on a kitchen workbench .
1 .2 Release the arm A
8
by pressing the PUSH button A
9
and tilt it upwards . The arm A
8
is locked in
the open position when the PUSH button A
9
slides out together with an audible click .
1 .3 Place the stainless steel bowl A
4
into the hole in the base unit A
5
and secure it in place by turning
it clockwise . When the bowl A
4
is properly attached, it is not possible to lift it off the base unit
A
5
.
2. Attaching an attachment (dough hook, beater or whisk)
2 .1 If you decide to use the pouring shield A
6
, then it is necessary to attach it prior to mounting an
attachment . Carefully seat the pouring shield A
6
on to the tilt-out arm and secure it in the locked
position by turning it anticlockwise .
2 .2 When attaching an attachment, the arm A
8
must be secured in the open position, see point 1 .2
in chapter Inserting the mixing bowl . Attach one of the attachments to the T-shaped shaft of
the mixing head A
7
so that the shaft fits into the hole on the attachment . Push the attachment
towards the mixing head A
7
turn it anticlockwise to secure it to the shaft .
2 .3 With one hand, hold the attachment and gently pull it downwards . If it is properly secured to the
shaft, it will not come off .
