Sencor SWS 211, User Manual

EN - 5

Automatic Reception and Manual Reception

The station starts automatic reception everyday at 1:00, 2:00, and 3:00. If it fails to receive the DCF 
signal at 3:00, it will start reception at 4:00. If it fails again, it will start reception at 5:00. If it fails 
again, it will start automatic reception at 1:00 again in the next day.

Manual reception: press WAVE/HR button once anytime to start manual reception of DCF time 

signal. The LED time display will go to radio reception mode 

. 

To Set Time 

Press and hold 

TIME

 button and at the same time press

 WAVE/HR

 button to set hour.

Press and hold 

TIME

 button and at the same time press 

MIN

 button to set minute.

To Set Alarm 1 Time 

Press and hold 

ALM 1

 button and at the same time press 

WAVE/HR

 button to set hour.

Press and hold 

ALM 1

 button and at the same time press 

MIN

 button to set minute.

To Set Alarm 2 Time 

Press and hold 

ALM 2

 button and at the same time press 

WAVE/HR

 button to set hour.

Press and hold 

ALM 2

 button and at the same time press 

MIN

 button to set minute.

To Turn ON/OFF Alarm 1 or/and Alarm 2

To turn on Alarm 1 only, press

 ALM

 button, ALM 1 LED lights up on upper left of the hour digits. 

To turn on Alarm 2 only, press

 ALM

 button again, ALM 2 LED lights up on lower left of the hour digits. 

To turn on both Alarm 1 and 2, press 

ALM

 button again, ALM 1 and ALM 2 LED light up.

To in-activate both Alarm 1 and 2 permanently, press 

ALM

 button again, both ALM 1 and ALM 2 LED 

turn off.

To Use The Snooze Alarm 

When time reaches the set Alarm 1 or Alarm 2 time, the clock will beep with the ALM 1 or ALM 2 
LED blinking. Press the 

SNOOZE 

button once, the alarm sound will stop and ALM 1 or ALM 2

LED 

keeps blinking. Alarm will sound again in time set for snooze

duration.

To Stop The Alarm 

When time reaches the set Alarm 1 or Alarm 2 time, the clock will beep with the ALM 1 or ALM 2

LED blinking. Press 

ALM 1 

or

 ALM 2 

button, the alarm sound will stop and ALM 1 or ALM 2

LED 

becomes static. Alarm 1 and/or Alarm 2 will sound again same time next day.

To Set Snooze Duration (from 5 to 60 minutes)

Press and hold 

SNOOZE 

and time display will show “05” (default snooze duration) and then press 

MINUTE 

button to set your desired snooze duration.