Sencor SWS 290, User Manual

EN - 6

INSTALLATION LOCATION OF THE SENSOR

●

   The cover of the external sensor is not waterproof. If the sensor is located outdoors then 

it must be located in a covered area so that it is not directly rained or snowed on.

●

   Never place the sensor on metal surfaces or objects or place it inside metal covers.

If possible, locate the sensor on the northern side of the house so that the temperature 
reading is not skewed by the effect of sunlight.

LOW BATTERY WARNING

A low-battery indicator will appear on the main unit, warning that the corresponding batteries 
need replacement.

Low power 

GETTING STARTED

TEMPERATURE DISPLAY

Once the batteries have been installed, the remote sensor will transmit temperature data at 
30 second intervals. The main unit may take up to two minutes to receive the initial readings. 
Upon successful reception, the remote temperature will appear on the top line of the main 
unit’s display (the default remote channel is channel one). The main unit will automatically 
update readings at 30 second intervals. Once communication between the main unit and 
remote sensor has been established, secure the remote sensor in the desired location.

PLACEMENT OF THE UNITS

The main unit can be placed on any 

fl

 at surface indoors

The remote sensor can be placed indoors or outdoors, on a 

fl

 at surface or mounted on the wall.