SMD 989
– User Manual
Page 56 (105)
User Profiles
The “Profiles” button opens a dialog box as shown in Figure 49. The user can create a new
profile based on the configuration of the complete system. The profile can be saved locally and
downloaded to a remote location for backup. The profile can also be uploaded and restored for
systems that have the same configuration.
Figure 49: Profile Manager
Note: The configuration of the unit must be the same from system to system to allow the profile to
load. If a profile is loaded onto a different channel platform, the profile will not load.
Setting Login Password
Once a user has clicked on the “
Change Password
” button located at the top of the admin tab a
dialog box will appear as shown in Figure 50.
The user will need to type the new password and confirm the password to change it from the
previous password.
Downloading SNMP MIBs
Clicking on the “Download SNMP MIBs” button located at the top of the Admin Tab will open a
dialog box as shown in Figure 51.
A new window will appear with the ability to download each MIB.
Figure 50: Setting password
