36
4.7 Security
4.7.1 MAC based Access Control
1. Click
Basic Config
,
select
MAC Filter
page
,
and choice the MAC Filter
services is
Enable
or
Disable
(as shown in
Figure 4-11
).
2. You can specify the MAC address of a wireless client station. All MAC
entries in the MAC address table are permitted to connect into the RB.
You can also click
ADD
,
DELETE
,
MODIFY
button to maintain this
MAC address table. After that, click
FINISH
at the bottom of this page
to complete the modification of this page.
Figure 4-11
37
4.8 Utility
4.8.1 Software Upgrade
1. Click
Utility
,
select
Software Upgrade
page (as shown in
Figure 4-
12
), and then you can use TFTP to upgrade your AP. In here, you must
specify the
TFTP server IP
and select which file you want to upgrade it
(
Program image, Web image
), then click
OK
button to start the TFTP
upgrade process.
2.
If the upgrade process is success, the AP will apply the new settings
and start rebooting right away.
Hint: You must set up a TFTP server and this server must contain one
latest new image.
Figure 4-12