To enter 2 characters on the same key, enter
the first one and then wait for the cursor to
reappear before entering the second.
Example: To enter the name “Ross” when you
are in lower case mode:
Press to enter upper case mode,
Press three times, to display "R",
you will then return to lower case mode,
Press three times, to display "o",
Press four times, to display "s",
Then press four times, to display "s".
Entering symbols
A long press on displays a table
showing all the symbols available to you.
Scroll down the table to display more symbols.
To enter a symbol:
1
Scroll to the row containing the symbol
you want.
2
Press the numeric key ( to )
to reach the the symbol you want.
Example: To enter the symbol , scroll to
the 4th row then press .
Splash
Go into the
Extras
menu and select
Splash
.
You will see an animated display.
An incomplete curly pipeline is displayed
starting at the top left of the screen and
water is slowly flowing towards the open
end. The goal is to connect the open end
of this pipe to the outlet at the bottom right
of the screen before the water overflows!
To do this you are supplied with pieces
of straight and bent pipe, which are shown
at the right of the screen. The piece at the
top of these is the next piece that you must
place on the board.
You move the cursor using the keys on the
grid below, the key drops your
bombs.
Messages
Predictive Text Input
To save time when you are writing a text
message, your phone has a feature which
guesses the letters that you are typing and tries
to complete the word.
This input method allows you to simply press
each key once. For example, to write the
name “Ross”, press , then , then
, then just once each.
The word may change as you type, but
don’t worry about what is on the screen
until you have finished the word. Sometimes
different words share the same sequence of
key presses. If the finished word is wrong,
press to scroll through other possibilities.
If the word that you are looking for is still
not there, press repeatedly to change
the text mode to and enter the word
again.
After you have completed a word, press the
space key to enter the next word.
Press and hold to pick a symbol to
insert from the character table.
Some intelligent punctuation (including full
stops, hyphens and apostrophes) are also
available on . The punctuation mark is
completed when you enter the next keystroke.
Your phone
Extras
Setting time and date
Enter the
Settings
menu to set the time
and date. Go to
Set date
and press ,
Select
, Enter the date, Press ,
OK
,
Go to
Set time
and press ,
Select
. Enter
the time in 24 hour format, Press ,
OK
.
The date and time will be stored.
Alarm clock
You can use your phone as an alarm clock.
Enter the
Settings
menu and press ,
Alarm
. Set the alarm to
On
and enter the
time (in 24hr format) when you require the
phone to ring. When it rings press
,
Off
, to switch it off, or
,
Snooze
, to stop the alarm for ten
minutes. The alarm will then sound again.
Note: The alarm will sound even if the
phone is switched off. The phone will
power on but you will not be able to
receive or make calls. Once the alarm
finishes the phone will switch off.
Equalizer
Enter the
Sounds
menu and select
Equalizer
.
This menu allows you to alter the
earpiece audio settings of your phone.
Choose from these 3 settings for optimum
audio quality:
• Treble
• Normal
• Bass
Shortcuts
To lock/unlock the keypad, press ,
then from the main screen.
To enter/exit silent mode press then
from the main screen.
To enter a pause while dialling press and
hold until the letter
p
appears.
This will insert a pause of 3 seconds.
☛
☛
1
2
3
4
Up and down keys
Located on the front of your
phone - these can increase
volume or scroll through menus
and options.
Soft keys
These keys perform the function
indicated by the text immediately
above them on the display.
Quick Access key
The function of this key will vary
depending on the model of your
phone. It provides quick access to
a certain function such as SIM
Toolkit or messaging.
Clear key
This erases characters or text or
takes you back to your previous
step, depending on the context.
A long press on this key takes you
back to the main screen.
FlippIT
Go into the
Extras
menu and select
FlippIT
.
There are 6 levels; 3x3 is the easiest.
The objective of the game is to change the
white discs to black discs. You do this by
selecting one of the white discs by pressing
the key. This turns the white disc to
black, but also turns all of the discs directly
above, below, to the left and to the right of
the selected discs to black.
You can move the cursor from one to another
using the keys in the grid below.
Calling your voice mail
When you have a new message in your
voice mailbox, your phone displays either the
voice mail icon in the main screen or
a text message sent from the network.
This depends on your service provider.
Press and hold . If the phone asks for
the voice mailbox number, enter it and press
,
Call
. The number can be obtained from
your service provider.
Reading a text message
When you receive a text message, the
envelope icon is displayed at the top
of the main screen.
1 Press ,
Read
, to display the new
message directly from the main screen.
2 To read old messages select read from
the messages menu.
3 Use the up and down keys and to
scroll through the message.
4 Press ,
Options
, to access the
following message options:
Delete
Removes the message.
Reply
Sends a text message to the sender
Call
Calls the sender (or, if there is a
number in quotes in the message,
this number is called instead).
Save no.
Adds the sender’s phone number
to your contact list.
Time/date
Displays the date and time of the
message.
Forward
Sends the message to someone else.
Sending a text message
You can send messages of up to 160
characters to another GSM phone.
1 Enter the
Messages
menu and select
the option
Send
.
2 Type in a new message or select a
message from a list of saved messages.
3 When you have entered the text, press
,
Send
.
4 Enter the destination phone number, or
press ,
Contacts
, and select a
name from your contact list.
5 Press ,
Send
, to send the message.
Note: If you reply to a message, you do not
have to re-enter the number. This is done
automatically.
☛
☛
Sending a Smiley SMS
Send a picture with your text message to
compatible phones. All other phones will display
an Internet style Smiley. Choose ,
Smiley.
1. Emotions 2. Celebrations
3. Sports
4. Animals 5. Others
Select the Smiley you would like to use from
one of these categories and press ,
Select.
The text is restricted to 156 characters to allow
space for the Smiley.
Reading a Smiley SMS
When you choose a message that has a Smiley
in it, the Smiley appears on the screen for 3
seconds or until a key is pressed. Then the
message appears. After this time the message
reads as normal. A message with a a smiley
attached has a icon if new and a
if read.
Note: If replying to or forwarding an SMS the
Smil
ey will not display and only appears on a
new message.
Message settings
This menu offers three options:
Status report
Allows you to set whether or not you wish to
be informed when your correspondent has
received the text message.
Centre number
Allows you to enter or change the service
centre number for text messaging.
Voice mail
Allows you to enter or change your voice
mail number.
☛
☛
2
4
2
3
1
Declaration of conformity
We: Sendo
International
Ltd
Of:
10th Floor AIA Plaza, 18 Hysan Avenue,
Causeway Bay, Hong Kong.
Declare under our sole responsibility that the product:
SND200, Known as S200 Identified by IMEI numbers
in the range:
TAC: 350156 FAC: 01
SNR: From: 000001 To: 499999
To which this declaration relates, is in conformity with the
following standards:
EN60950 (Electrical Safety Standard, IT equipment)
ETS 300 342-1 (Product standard for EMC)
ETS 300 607-1 (GSM Phase 2 MS test specification)
as defined in:
TBR19 (as interpreted by GT01 version 4.6)
TBR20 (as interpreted by GT01 version 4.6)
TBR31 (as interpreted by GT01 version 4.6)
TBR32 (as interpreted by GT01 version 4.6)
ES 59005
(European Council recommendation 1999/519/EC)
We hereby declare that the above named product
is in conformity to all the essential requirements of
Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10
and detailed in Annex IV of directive 1999/5/EC has been
followed with the involvement of the following notified body:
BABT, Claremont House, 34 Molesey Road,
Walton-On-Thames, KT12 4RQ. England.
Identification Mark: 168 (notified body number)
The technical documentation relevant to the above
equipment will be held at: Sendo Ltd,
Centrelink House, Talbot Way, Small Heath Industrial
Estate, Birmingham, B10 0HJ England.
The authorised EU representative is:
Mike Roper
Senior Approvals Engineer
30/03/01
Dialling a number
1
Key in the area code and number that
you want to call then press ,
Call
,
to dial.
To delete the entire number and return to
the main screen, press and hold .
2
You can adjust the earpiece volume in
a call by using the front keys .
3
To end the call, press ,
End
.
Making an international call
1
Press and hold until the plus sign
"+" is displayed. This replaces the
international access code.
2
Enter the country code, area code,
and phone number.
3
Press ,
Call
, to dial.
Making an emergency call
1
Enter
112
(or the local emergency
number).
Press ,
Call
, to dial.
Making calls from the contact list
1
Press from the main screen, you can
also press ,
Contacts
then select
the
Search
option.
2
Type in the first letters of the name or
scroll and find the one that you want.
3
Press ,
Call
, to dial.
Speed dialling
Allows you to dial a number simply
by pressing and holding the assigned key
from the main screen.
To assign a contact list entry to a key:
Press , then press and hold one of the
keys to until the key number
appears on the left of the screen, beside
the name. This indicates that the speed
dial is successfully assigned.
Making a call from the calls list
The phone stores a list of your recent
incoming, outgoing and missed calls.
The list stores up to 30 entries.
An icon on the left of the screen indicates
the type of call:
Incoming call
Missed call
Outgoing call
To dial a number from the redial/calls list:
Press to access the list. Scroll and
find the one that you want and press
,
Call
, to dial.
Making a call
Answering a call
Answering a call
To answer a call, press ,
Accept
.
To reject a call, press ,
Reject
.
Call waiting
This feature means you are informed of a
second incoming call by an audible tone
in the earpiece.
Press ,
Reject
, to reject the second call.
Press ,
Accept
, to put the current call
on hold and activate the second call.
To end the active call and return to the
held call, press
,
End
.
To switch between calls, press ,
Options
, then select the
Swap
option.
Note: Your network may not support call
waiting. If it does not, accepting a second
call will end the first call. You will not be
able to switch.
In call options
When you are in a call, you can press
,
Options
, these could be:
Contacts
Gives you access to the contact list.
Hold/Unhold
Puts the active call on hold/reactivates
the held call.
Mute/Unmute
Switches the microphone off/on.
Send message
Allows you to send a text message.
SIM Toolkit
Gives you access to the SIM Toolkit.
Swap
Swaps between the current call and the
call on hold.
End all
Ends all calls.
☛
☛
Useful tips
Key
List of characters available
1
1. , @ ‘
? !
“ : ;
¿ ¡
2
a b c 2 à ä å æ ç
3
d e f 3 é è
4
g h i 4 ì
5
j
k l 5
6
m n o 6 ñ ò ö ø 6
7
p q r s 7 ß
8
t u v 8 ü ù
9
w x y z 9
0
0
#
space
Key
List of characters available
1
2
3
4
5
6
7
8
9
.
,
-
!
?
@
(
)
:
&
'
"
/
_
;
$
%
+
*
=
<
>
#
£
¥
∆
§
Γ
Θ
Λ
Ξ
Π
Σ
Φ
Ψ Ω
¿
¡
à
ä
å
æ
ç
é
è
ì
Ä
Å
É
ò
ñ
Æ
ö
ø
ß
ü
ù
Ñ
Ö
Ø
Ü
C
C
On the right of the screen you will see the
number of moves that you have made so
far, and also the smallest number of moves
that it is possible to complete the level in.
With each higher level the grid gets bigger
and bigger, and harder!
The key places the section in the
position of the flashing cursor. However,
be careful, once you have put down a
piece you cannot move it.
You are provided with 3 bombs. These
bombs will delete the piece where the
cursor is positioned.
Use them wisely.
Once you have managed to complete you
can press to speed up the pipeline to
the outlet, you can press the key to speed up
the water, to finish the level. With each level
it gets faster and faster.
Good luck!
Scizzors
Go into the
Extras
menu and select
Scizzors
.
You will see an animated display.
In order to select the stone, press .
To select the paper press .
To select the scissors press .
The object of the game is to try to beat
the computer by selecting one of the
3 objects. When you do this the computer
also selects one of the 3 objects.
The rules are simple:
Scissors
(2 fingers out) cuts paper,
therefore scissors wins,
Paper
(flat palm) wraps stone,
therefore paper wins,
Stone
(fist) blunts scissors,
therefore stone wins,
Two of the same result in a draw.
When you drop a counter, it will fall all
the way to the bottom or sit on top of any
other counters that are in that column. So,
think carefully before you play!
You move the flashing cursor left and
right along the top of the screen using
the and keys.
Pressing will drop the counter into
the column.
Quaddro
Go into the
Extras
menu and select
Quaddro
. You can select the
number of players:
Demonstration
mode lets you watch
the computer play against itself.
You against the
computer
.
You against a
friend
.
The objective of the game is to drop your
counters into the slots along the top of the
board, in the attempt to create a line of
four, horizontally, vertically or diagonally.
Ringer tone composer
Go into the
Sounds
menu and press ,
Composer
.
Change your ringer tones to personalise
your phone. Create your own tones with
our ring tone composer.
In this menu the keys represent the
following notes:
C
D
E
F
G
A
B
Enters a rest
Changes the scale of the note
between the range 1-4
Changes the duration of the
note. Each press
decreases the
duration
of the note between the
range: full note, half note, quarter
note, eighth note, sixteenth note
and thirty-second note.
Changes a normal note to a sharp
and a sharp back to a normal note.
Changes a normal note to a dotted,
double dotted or 2/3 note.
Erases the previous note. A long
press will clear all notes.
Once you have composed the tone press
,
Options
to enter the menu screen.
The available options are:
Tempo:
Allows you to choose from a list of
tempos at which to play your tone.
Play:
Allows you to play your melody
Save:
Allows you to save your melody.
Delete:
Allows you to delete the tone.
Send:
Allows you to send your tone to
one of your friends.
Receiving a ringer tone
If you have received a ringer tone press
,
Options
to enter the menu from
where you can play, save or delete the
tone. If you press clear the ring tone and
message will be deleted.
Note: It is only possible to save 5 ringer
tones whether you have composed them
yourself or received them as a message.
To save more you will have to overwrite
an existing ringer tone.
☛
☛
Changing the editing mode
The current editing mode is indicated at the
bottom of the screen by one of these icons:
Lower case text mode
Upper case text mode
Numeric mode
T9 Text Input (lower case)
T9 Text Input (upper case)
You can switch between upper case, lower
case, and numeric modes by repeatedly
pressing
. You can switch to predictive
T9 Text Input by repeatedly pressing .
These are the characters which come on to the
screen when you press the numeric keypad.
They are featured in the table below:
O425-New-Sendo-insert 15/3/01 2:34 pm Page 1
