USER MANUAL – RTU-LP-ST
16
4.
DEVICE OVERVIEW
The RTU-LP-ST is an ultra low power device, the RTU is always sleeping (with the modem OFF) but when an
event is registered the RTU can Wake-up and send data.
It’s also possible to configure the device to send data at a time interval or wake up the board at fixed time
leaving the modem ON for minutes (for receiving commands).
RTU-LP-ST device can send the following type of data:
1)
SMS with a Wake up Report
2)
SMS with a Real Time Event
3)
FTP file with a Real Time Event
4)
FTP log file with the analog inputs (File 0)
5)
FTP log file with events (File 1)
RTU-LP-ST device can receive the following type of data:
1)
SMS with a command
2)
Configuration through the RS232 port
