Seneca X-HDU
Physical connection guide
Revision 1.0.0
May 2012
© 2011-2012
Avitech International Corporation
All Rights Reserved
9
http://avitechvideo.com
Front panel of Seneca X-HDUR
There are four LEDs and one IR port in the front of the Seneca:
Power
– The PWR LED glows green when power is connected, otherwise OFF
Link
– The LINK LED glows green when the Seneca X-HDUR is connected to the Seneca X-HDUT and when power is connected to both devices, otherwise OFF
Status
– The STAT LED glows green when the Seneca X-HDUR has detected that the Seneca X-HDUT is connected to a particular computer, glows orange when the Seneca
X-HDUT is not connected to a computer, blinks amber during firmware upgrade, otherwise OFF
HDCP
– The HDCP LED glows green when the source signal includes HDCP encryption, blinks green when the source signal does not include HDCP encryption,
otherwise OFF
Infrared
– The IR blaster port accepts infrared signal from an IR-compliant device for wireless communication (e.g., remote controller)