USER MANUAL – Z-GPRS2-SEAL / Z-LOGGER-SEAL
103
Input Type:
Select the digital inputs type.
When PNP is selected, the the digital input is ON when the digital input is at +12Vdc, the digital input is OFF
when the digital input is at GND.
When NPN is selected, the the digital input is ON when the digital input is at GND, the digital input is OFF
when the digital input is at +12Vdc.
CAUTION!
Selection of PNP or NPN mode of one input will copy the selection to all the digital inputs.
Input Logic:
Select if the input is normally open or normally close.
Pulse weight:
If Checked you can setup the weight of one pulse of the partial counter and the counter. This
function is useful for obtain the unit measure desired from the external senor. In the example one pulse
value is set to 0.1 m³. Note that when the partial counter or the counter reach the 999999999.0 the next
pulse obtain the overflow to 0.0.
NOTE
The partial counters and the counters values are always saved in not volatile memory.
12.11.
Digital Input Configuration Window
Alerts