USER MANUAL – Z-GPRS2-SEAL / Z-LOGGER-SEAL
107
Counter Type:
Select from
None
Counters alerts are disabled
Work Time
Select for obtaining how long the selected digital input was to 1. When the digital input return
to 0 the work time will reset.
Timeout
Select for obtaining how long the selected digital input was to 1. When the digital input return to 0
the work time will stop but don’t reset. This alert is useful for scheduled maintenance.
Alarm Threshold
is the time threshold used for the alert.
12.12.
Digital Output Configuration Window
General
In this window you can setup the embedded digital outputs.
Digital Output Logic:
Select the Normally Open or Normally Close output logic.
NOTE
The Normally Open/Close logic can also be set by the terminal screw.
