USER MANUAL – Z-GPRS2-SEAL / Z-LOGGER-SEAL
137
State Transition:
Select how the event control execute input/output relation:
Condition change (default):
The Control State Output action is executed one time, then the Event Control
remain paused into the current state. The inputs are not evaluated until the inputs don’t changes.
Manual Re-Arm:
The Control State Output action is executed one time, then the Event Control remain
paused into the current state until a command SMS or an action will re-arm the event control. The inputs
are not evaluated until the inputs don’t changes.
Timed Hold-Off:
The Control State Output action is executed one time, then the Event Control remain
paused into the current state until the configured
hold off time
is passed. Only after the hold off time the
inputs are evaluated again.
Timed Repeat:
The Control State Output action is executed one time, then the Event Control remain
paused into the current state until the configured
hold off time
is passed. After the hold off time the event
control inputs evaluation is executed another time without the need of an inputs changes.
Manual Repeat:
The Control State Output action is executed one time, then the Event Control remain
paused into the current state until a command SMS or an action will repeat the event control inputs
evaluation, without the need of an inputs changes.
Auto Repeat:
The Control State Output action is executed one time, then the Event Control remain paused
into the current state until the inputs don’t changes. If there is a disable/enable EC event the output action
state is performed also if the inputs are not changed.
Ignore State:
The Control State Output action is executed one time but then the Event Control don’t
remain paused into the current state. The inputs are not evaluated until the inputs don’t changes.
Notification:
Select if the action connected to the output must be a notification. The options are:
Send:
Nothing (don’t send notify), SMS (send SMS with the text configured into the Notify Message block),
E-MAIL (send E-MAIL with the text configured into the Notify Message block), SMS+E-MAIL (send SMS and
E-MAIL with the text configured into the Notify Message block), Http (Send an Http post through GPRS to
the server with the text configured into the Notify Message block), SMS+Cloud (Send through GPRS an Http
post to the server and SMS with the text configured into the Notify Message block).
Hold Off Time:
Time used for the Timed hold off and Timed Repeat State transition function.
