USER MANUAL – Z-GPRS2-SEAL / Z-LOGGER-SEAL
88
AINx_MIN
is the analog input x minimum value calculated in the sample time, the analog input acquisition
speed is 50 ms.
AINx_MAX
is the analog input x maximum value calculated in the sample time, the analog input acquisition
speed is 50 ms.
Digital Inputs
DINx_DELTA
is the counter x difference between the last sampled value and the actual sample.
DINx_TOT
is the total counter x sampled value.
DINx_CNT
is the partial counter x sampled value.
DINx_WRK
is the input x work time sampled (how many time the input is been ON or OFF).
DINx_STS
is the digital input x sampled status value (1=ON or 0=OFF).
Digital outputs
DOUTx_STS
is the digital output x sampled status value (1=ON or 0=OFF)
Misc:
SYS_POW
is the main power status (1= main power ok, 0 = main power down)
SYS_VBAT
is the battery charge status (1 = battery charge ok, 0 = battery charge low)
GSM_DBM
is the GSM value in dBm, the field value can be obtained by the following table:
GSM Signal
GSM signal [dBm]
0 (MINIMUM)
-115
1
-106
2
-97
3
-88
4
-79
5
-70
6
-61
7 (MAXIMUM)
-52
